Sitemap

Gaseous suppression for control rooms, server rooms and cable galleries.

Total flooding carbon dioxide for unoccupied electrical and machinery spaces.

Detection and alarm, supplied and integrated under the same contract as the suppression system.

Plant-wide ring main, hydrants, monitors and hose boxes, sized to the site.

Hazard assessment, hydraulic calculation, layouts and approval drawings for the consultant or insurer.

Pumps, drivers, suction reservoir and controls — the source everything else runs on.

Medium and high velocity spray for vessels, transformers and process equipment.

Optical flame detection for open process areas, fast enough to release deluge.

Bladder tanks, pourers and makers for tank farms, bund areas and loading gantries.

Flammable and toxic gas detection for process areas, with alarm and shutdown.

Detection and foam discharge at the seal of a floating roof tank.

Wet, dry and pre-action systems for warehousing and buildings.

Separation and exposure protection where spacing alone is not enough.

Fine water mist for turbines, machinery spaces, cable tunnels and electrical rooms.

High expansion foam and overhead systems to NFPA 409.

Linear heat detection with water spray or clean agent.

Clean agent suppression where water would destroy what it saves.

Linear detection and deluge along the belt run.

Top pourers and foam chambers discharging onto the liquid surface.

Rimseal fire and full-surface fire need different answers. Detection at the seal, foam at the roof.

Spray protection at valve and manifold congestion.

Spray protection over rotating equipment and seal leakage points.

Water spray for cooling and exposure protection on pressurised storage.

Foam makers on the bund wall for spill fire in the containment area.

High velocity water spray, with drainage and separation designed in.

Foam and water spray over loading bays, with detection at the arms.

Sprinkler design against the commodity classification and storage height.

Foundations, pedestals, trenches, structural steel and buildings.

Cabling, trays, earthing, lighting and switchgear to hazardous-area classification.

Static and rotating equipment set, aligned, grouted and handed over.

Cementitious and intumescent protection to structural steel and supports.

Electrical and steam tracing for viscous and freeze-sensitive service.

Thermal insulation and cladding for hot lines, cryogenic service and vessels.

Above and below ground pipework, fabrication, welding, testing and radiography.

Storage tank fabrication and erection, plate work, testing and calibration.